DE
EN
DE
FR
HU
RO
ES
Show content
Direct answer to the search query
PV surplus can be used with the Anker First, store the SOLIX Solarbank 3 E2700 Pro in storage and then use it specifically in the household. Smart Mode requires a compatible smart meter, analyzes generation and consumption, and can include optional features. Anker SOLIX Smart Plugs automatically switch on when excess solar energy is available.
What is considered PV surplus?
PV surplus occurs when the Solar Panels It generates more energy than the household currently consumes and the storage system can still hold. Without targeted control, this electricity is either fed into the grid or remains unused, depending on the system.
The solar power bank can initially support direct household consumption and store the remaining solar power. If additional energy is available, the Smart Mode helps to shift suitable appliances to the period of surplus power.
What is the purpose of the smart meter?
The Smart meter It measures the energy flow at the grid connection point. This allows the system to recognize whether electricity is currently being drawn from the grid or excess energy is being fed in. Anker names the smart meter as a prerequisite for smart mode.
Correct installation and a stable network connection are crucial. A separate or incorrectly measuring meter can lead to inaccurate consumption forecasts and prevent the self-consumption control system from functioning as intended.
How does Smart Mode utilize the surplus energy?
After activation, Smart Mode initially learns from historical data. Anker The system specifies a learning phase of up to 24 hours. Afterwards, the system creates a new configuration based on consumption, solar generation, and selected parameters. Electricity tariff a charging and discharging strategy.
the essentials in brief
- Solar power is used to meet current household needs first, if possible.
- Remaining energy charges the solar bank.
- If the system anticipates further surplus, it can send a notification.
- With configured smart plugs, selected consumers can be activated automatically.
Smart Plug: optional, but can be used selectively
A smart plug is not strictly necessary for Smart Mode. Without a smart plug, the app will notify you of expected excess power, allowing you to manually switch on devices. With a smart plug, activation can occur automatically.
Anker For this smart mode application, a maximum power consumption of 2.000 W per smart plug is specified. Additionally, at least 0,1 kWh of excess energy must be expected to trigger automatic activation. Only devices that are permitted to start up safely and independently after power is supplied are suitable.
Suitable system at Mini Power
The product selection was compared with the currently published Mini Power range.
Practical setup
- Update the solar bank, smart meter and app to the latest firmware version.
- Install the smart meter professionally and check it in the app.
- Activate Smart Mode and set up the electricity tariff and necessary permissions.
- Wait for the learning phase to complete and check the forecasts.
- Optionally add a smart plug and select only suitable consumers.
- After a few days, check whether less energy is being fed into the grid and more solar power is being used independently.
fitting products
Frequently asked questions
Does Smart Mode work without a smart meter?
No. Anker A compatible smart meter is a prerequisite for Smart Mode. A smart plug, on the other hand, is optional.
Does every device need to run via a smart plug?
No. The smart plug is only intended for selected appliances that should switch on automatically when excess power is detected. Other devices can still be used manually.
Official database
Functionality, requirements and limit values were updated with the current Anker SOLIX Explanation "What Is Smart Mode? How Can I Benefit From It?" matched.
Next reading step
Read more relevant
