Since my neighbor installed two solar panels on his garage, I've been shown a second solar system. This one connects directly to the smart meter without any power output information! Even though the blue one feeds in directional current?
Under solar operation, my own PV from 1 – 4 is clearly visible with the incoming wattage.
But among my four, there's a third-party photovoltaic system with 0 watts input. I can't enter anything there either, just like with my PV systems. Thank you for your efforts and for clarifying this; it looks like I have two solar systems.
Solarbank Pro 3 Performance Overview: Home Network & Emergency Power Socket
The Solar Bank Pro 3 is one of the most popular solutions for balcony power plants with storage. However, many users ask the same questions:
-
How much power does the Solarbank Pro 3 deliver at the home mains output?
-
How strong is the emergency power socket of the Solarbank Pro 3?
-
Can I use both outputs at the same time?
-
Does an extended battery provide more output power?
In this article we clarify the most important points about the Solarbank Pro 3 Performanceso that you can use your system optimally.

1. Solarbank Pro 3 home network output (AC output to the grid)
The Solar Bank Pro 3 has a home network output through which energy is fed into the home's own power grid.
-
Maximum Performance: up to 1200W (technically possible, model dependent).
-
This output is suitable for supplying the household via a normal socket.
Many users are looking for: “Solarbank Pro 3 home network performance” or “Solarbank Pro 3 maximum output power”Important: Even if 1200 W is technically possible, this value is shared with the emergency power socket.
2. Solarbank Pro 3 emergency power socket (backup terminal)
A real highlight of the Solarbank Pro 3 is the integrated emergency power outlet. It remains active even in the event of a power outage and allows devices to be operated directly from the solarbank – without the need for a home power supply.
-
Maximum Performance: up to 1200 W (according to the FAQ also up to 2000 W for a short time, supplemented by the power grid).
-
Typical applications: Kitchen appliances, air conditioners, computers or other consumers that should run independently of the home network.
In many forums the question arises whether the 800 W feed into the house network familiar with the Emergency power socket According to the official Anker FAQ:
-
The solar bank feeds up to 800 W into the house network .
-
At the off-grid output up to 2000 W devices operated However, any excess power will be automatically supplemented from the power grid.
👉 This means: A parallel use of the house network output and emergency power socket is possible, but the solar bank itself provides not the full 2800 W ready, but shares the load with the power grid.
3. Can the home network and emergency power be used simultaneously?
One of the most frequently asked questions about the Solarbank Pro 3 is:
👉 “Can I draw 800 W from the house mains + 1200 W from the emergency power socket and thus use more than 2000 W simultaneously?”
The answer: No.
The Solarbank Pro 3 works with a common performance pool.
The house network outlet and the emergency power socket share this power, so they are non-additive.
Examples of typical scenarios:
-
Emergency power 600 W + house network 200 W = 800 W total
-
Emergency power only = up to 1200W
-
Home network only = maximum 800 W (feed-in limit)
👉 So if you are looking for “Solarbank Pro 3 double performance” should know: The outputs do not complement each other, but share the available total power.
This makes it clear: For the home network, there is a fixed upper limit of 800 W, while the emergency power socket can charge up to 1200 W can supply – but not in addition to the house grid feed.

4. Solarbank Pro 3 with extended battery (BP2700)
Many owners consider: “Does an extension battery provide more output power for the Solarbank Pro 3?”
Die Antwort: No, just faster charging.
-
With an extension battery, the maximum charging input power from 1800 W to 3200 W.
-
This means that the Solarbank Pro 3 can be charged significantly faster using solar modules or from the mains.
-
The Output logic (house network + emergency power socket) remains unchanged – the shared pool of 1200 W still applies.
5. Common misunderstandings (Solarbank Pro 3 FAQ)
-
❌ “House network 800 W + emergency power 1200 W = 2000 W total power.”
→ Incorrect. Both outputs share the same inverter. -
❌ “With an extended battery, the output power increases.”
→ False. The battery only increases the charging speed. -
✅ "Solarbank Pro 3 offers flexibility: I can freely choose whether to feed the power into the home grid or connect devices directly to the emergency power socket."

Anker SOLIX E2700 Pro
2,68 kWh storage
€ 1.199 | anchor prime day Save up to 200 €!
- ⭐ For balcony power plants
- ⭐ Easy installation
- ⭐ Emergency power, app, modular
6. Conclusion: Solarbank Pro 3 performance in practice
The Solar Bank Pro 3 It impresses with its flexibility and ease of use. However, it's important to know:
-
Maximum output power = 1200 W (House network + emergency power together).
-
Both outputs can be used independently but share the same power limit.
-
With Extension battery (BP2700) the charging power increases, but not the usable output power.
So if you are looking for “Solarbank Pro 3 maximum performance”, “Solarbank Pro 3 emergency power socket” or Solarbank Pro 3 with extended battery is looking for, you will find the clear answer here:
👉 Power pool of 1200 W, flexibly distributable – not additive.
Source reference:
Some information and examples mentioned in this article are based on discussions from the community, especially from the forum r/Balkonkraftwerk.
Some information in this article is based on official Anker documentation and community discussions, including the FAQ “Can I charge my electric car with the Solarbank 3 E2700 Pro?” (Anchor Support)
dark markets 2025 best darknet markets darkmarkets nexus link





0 comments