1. Introduction: Electricity storage in transition

In light of rising energy prices and growing demand for independence from electricity providers, intelligent storage solutions are increasingly coming into focus – not only for balcony power plants, but also for larger photovoltaic systems. The manufacturer cendura offers with its products SolarFlow 800, 800 Pro and the new one SolarFlow 2400 AC three different solutions for different user groups and application areas. This article compares the systems in terms of their technical features, target groups, and practical applications.

👉 Zendure SolarFlow 800
👉 Zendure SolarFlow 2400 AC – for maximum independence with emergency power

2. Features and differences in detail

The SolarFlow 800 represents the entry-level solution: It is compact, easy to install and offers a storage capacity of 768 Wh, expandable up to 3.072 Wh. The maximum PV input power is 800 W, which makes it particularly suitable for classic balcony power plants.

The SolarFlow 800 Pro goes one step further: With a maximum PV output of 1.200 W, a charging output of 1.200 W, and a discharging output of 800 W, it allows for more efficient use even with higher energy consumption. Both systems are based on DC technology and feature simple plug-and-play installation.

The new SolarFlow 2400 AC However, it clearly stands out from the other two: With a base storage capacity of 2,88 kWh and a modular design that allows expansion up to 17,28 kWh, this model is aimed not only at balcony power plants, but also at larger PV rooftop systems. The storage system uses long-lasting and safe LiFePO₄ batteries and offers a maximum AC output of up to 2.400 W. A special feature is the integrated ZENKI AI energy management, which analyzes consumption, weather data, and electricity prices to optimize self-consumption – according to the manufacturer, this can result in savings of up to 42% on electricity costs. The system operates with a response time of just 3 seconds and a control precision of 1 watt.

3.Target groups and application scenarios

Zendure's three storage solutions address different user needs. The SolarFlow 800 is ideal for beginners with low energy requirements, while the 800 Pro is designed for ambitious balcony systems with higher performance. The 2400 AC is aimed at tech-savvy users with higher demands and offers greater flexibility thanks to its AC architecture – both for retrofitting and in conjunction with existing PV systems. Particularly noteworthy is the easy installation via a standard Schuko socket, which allows for use without the need for an electrician.

4. Technical comparison at a glance

5. Conclusion: Future-proof storage solutions for every scenario

The selection of the appropriate power storage system depends largely on individual requirements and the existing PV infrastructure. SolarFlow 800 and 800 Pro are particularly suitable for compact balcony systems, the Zendure SolarFlow 2400 AC represents an innovative, scalable solution – both for balcony power plants and larger PV systems. Its combination of high performance, AI-based energy management, and simple plug-and-play installation makes it a future-proof companion for households that value energy efficiency, independence, and smart control. With the option of flexibly expanding the storage capacity, the SolarFlow 2400 AC adapts dynamically to the changing needs of modern energy users.

Have you found the right system for your needs? Then go directly to the products here:

👉 Zendure SolarFlow 800
👉 Zendure SolarFlow 2400 AC – for maximum independence with emergency power