The Solar Bank 3 Pro is an advanced storage system for balcony power plants. Its major advantage lies in the so-called intelligent mode, which automatically regulates power flows. But especially in the first few days after installation, many users ask themselves the same question:

“Why isn’t my solar bench working?”

The answer is: She is doing something – just more intelligently than you think.

👉 To the product page of the Solarbank 3 Pro

💥 Save up to 220 € – exclusively on the Anker Solar Bank 3 E2700 Pro Storage 2.68kWh ! Simply enter the discount code anchor prime day Enter when ordering.

What is the intelligent mode of the Solarbank 3 Pro?

The intelligent mode the of Solar Bank 3 Pro continuously analyses the most important parameters of your Balcony power plant with storage, including:

• the current one PV yield your solar modules,

• the current one Electricity consumption in the household,

• the dynamic electricity tariffs (e.g. in TOU mode via Anchor App),

• and the behavior of linked devices such as SmartPlugs or time switches.

The goal of this intelligent power storage is clear:
To store electricity when grid prices are low or when there is a PV surplus – and to automatically feed it into the home grid when consumption is high or during expensive times, without the need for manual intervention.

In contrast to the classic timing the solar bank works in intelligent mode dynamic, learning and adapted to actual consumption – ideal for energy-efficient use in everyday life.

Why does the Solarbank 3 Pro initially show little activity in intelligent mode?

Many new users experience the first few days as “silent”: no visible feed-in, no charging, no consumption from the storage.

This is because the algorithm of the Solar Bank 3 Pro first several days of learning time needed :

This behavior is therefore not a mistake, but a sign of data-based optimization.

What does sleep mode mean on the Solarbank 3 Pro?

When there is no power demand or no PV yield and the battery has reached a defined minimum value(z. B. 10 %),the Solarbank 3 Pro switches to Sleep mode(also called “standby”.

Typical symptoms:

• No LED display,
• 0 W charging or discharging power in the app,
• No audible operation.

This rest phase protects the battery from deep discharge and avoids unnecessary cycles – a feature of high-quality storage solutions.

 👉 To the product page of the Solarbank 3 Pro

What does sleep mode mean on the Solarbank 3 Pro?

In some cases it is desirable that the Solar Bank 3 Pro remains active even when the remaining capacity is low or starts up again more quickly – especially during the running intelligent mode or when used as Balcony power plant storage with TOU function.
Here are some proven ways from the community and the official Anker FAQ:

1. Automatic reactivation by PV yield or grid power

As soon as PV power is generated again (e.g. at sunrise) or cheap night-time power is available via the socket, the Solar Bank 3 Pro This happens automatically and is reactivated – without any manual intervention.
This is especially useful in combination with the intelligent mode and activated Electricity tariff schedule in the Anker app.

2. Manual switching on via power button or schedule

If no power source is available or rapid reactivation is required, the Solar Bank 3 Pro You can also wake up by briefly pressing the power button.
Alternatively, you can use the Anchor App a Timetable which automatically switches the device on at certain times of the day – ideal for users with a fixed consumption profile.

3. Avoid deep discharge: flexibly adjust the discharge limit

In the menu of Anchor App The minimum discharge limit of the battery can be flexibly adjusted (e.g. from 10% to 15% or 5%). This allows the entry into the Sleep mode can be specifically delayed or activated earlier – depending on whether you prefer more autonomy or battery protection.

Tips for optimizing the intelligent mode of the Solarbank 3 Pro

Conclusion: Why the Solarbank 3 Pro sometimes “does nothing” – and that’s exactly right

The Solar Bank 3 Pro is not a simple energy storage device – it is a learning system that intelligently adapts to the household.
What looks like inactivity is often a sign of efficiency: less wear and tear, targeted use, smart power consumption.

With a little patience, proper configuration and understanding of sleep mode, you can unlock the full potential of your Balcony power plant with storage unfold.

👉 To the product page of the Solarbank 3 Pro

Sources & Community Reference

Some content of this article is based on publicly available information from the Anker SOLIX Community and the official Anker Support Knowledge Base:

• Sleep mode (“device sleep”) of the Solarbank 3 Pro
  → User contributions in the forum topic “Solar bench 3 device sleep” and experiences with firmware 1.0.0.20

• Smart Mode: Low Revenue & Learning Process
  → Official help articles from the Anker Support Knowledge Base:
  “Why are my earnings low in Smart Mode?”
  “Why did the learning process fail in Smart Mode?”