SolarFlow Mix Series

Mix is the real Max

View product

*SolarFlow 4000 Mix Pro only
25 dB measured at a distance of 1 m under quiet laboratory conditions at 25 °C and 2.000 W half load operation. At full load, the noise level is approximately 40 dB.

The right mix solution for your annual consumption

10.000 cycles | 15-year lifespan | 10-year warranty

Made for everyday use. Built to last for many years.

With 10.000 charge cycles, the SolarFlow Mix Series is designed for frequent use and long-term value. With two full charge and discharge cycles per day, a lifespan of up to approximately 15 years is possible. Even at the end of its lifespan, the state of health (SOH) remains at 70%.

90% RTE

Save more. Keep more.

90% round-trip efficiency means fewer losses between charging and discharging and more usable energy in everyday life. For households with daily use, this translates to increased self-consumption and greater savings potential.

* 95% charging efficiency on the module side × 95% discharging efficiency on the module side ≈ 90,25%. Tested in Zendure-Laboratory. Laboratory tests are decisive. The actual RTE may be lower due to cabling, temperature, humidity, and other environmental factors.

AC coupled PV inverter + high voltage MPPT

More powerful in new installations. Smarter in retrofits.

The SolarFlow 4000 Mix Pro supports up to 8 kW dual MPPT with a high-voltage PV input, making it ideal for larger solar systems and new installations. In suitable setups, the system can be built more directly, without additional steps in the system design.

At the same time, the SolarFlow Mix Series features a new input for AC-coupled PV inverters. This allows AC power from an existing PV system to be integrated – ideal for retrofits where existing cables and system infrastructure are to be reused. This significantly reduces installation effort and conversion costs. With the SolarFlow 4000 Mix Pro, this, combined with the MPPT input, results in a total PV input power of up to 13 kW.

* 8 kW Dual-MPPT only available with the SolarFlow 4000 Mix Pro
** AC input for AC-coupled PV inverters on SolarFlow 4000 Mix Pro & SolarFlow 4000 Mix AC+

100% compatible with PV inverters for rooftop systems

Keep your existing inverter. Easily add storage.

The SolarFlow Mix Series is compatible with common rooftop PV inverters and is particularly suitable for households that already have a solar system and now want to add a home energy storage system. The existing inverter and much of the existing wiring can be retained – for a faster, cleaner, and more cost-effective upgrade.

The SolarFlow 4000 Mix AC+ increases the output power of a single circuit from the usual 3680 W to 4000 W and can achieve a maximum AC output power of 5000 W in PV bypass mode. This makes it particularly suitable for high household loads during peak consumption times.

The SolarFlow 3000 Mix AC+ delivers up to 3 kW of plug-and-play AC power. This makes it powerful enough to supply more everyday household appliances without nearly fully utilizing a standard 3680 W household circuit. This leaves ample reserve for smaller devices and fluctuating power consumption.

From plug-and-play to hardwiring

Strong performance – with a sensible reserve on the line

The SolarFlow 3000 Mix AC+ delivers up to 3 kW of plug-and-play power. This is sufficient for many typical household appliances without nearly utilizing a 3680 W mains connection. This leaves more room for other small appliances and load fluctuations. If more power is required, the SolarFlow 4000 Mix models offer even greater reserves for heavier household loads.

* 95% charging efficiency on the PV side × 95% discharging efficiency on the PV side ≈ 90,25%. Tested in Zendure-Laboratory. The laboratory has the final right to interpret the test results. The actual round-trip efficiency (RTE) may be lower due to cabling, temperature, humidity, and other environmental factors.

8 kWh capacity | expandable up to 50 kWh

Powerful even as a standalone unit. Flexibly expandable later.

With 8 kWh, a single device already offers enough capacity for many essential household and light commercial loads. If longer runtimes, more backup power, or a larger energy system are needed later, the system simply expands.

* SolarFlow 4000 Mix Pro & SolarFlow 4000 Mix AC+ uniquement.
** The extension batteries for the SolarFlow 4000 Mix Pro & SolarFlow 4000 Mix AC+ models are always announced.

Connectors | Hardwiring | LAN / RS485 | Solar connection

Easy to start. Easier to expand.

From plug-and-play and hardwiring to wired communication and solar integration: The SolarFlow Mix Series can be adapted to your needs step by step. Low entry barrier today, flexible expansion tomorrow.

1. Connect the AC to the house network
Via wall socket or hardwiring – depending on the setup.

2. Connect the solar panels
Connect PV systems and intelligently link generation, storage and consumption.

3. Connect communication
LAN / RS485 provides connections for more stable communication.

ZenGuard battery protection system

Dual BMS architecture

Dual surveillance. Early detection.

More comprehensive monitoring helps to track the battery status more accurately and to detect potential anomalies earlier.

Intelligent battery self-maintenance

Less effort. More stable battery condition.

Intelligent strategies help to keep the battery in a healthier operating condition in the long term.

Aerosol fire extinguishing system

Additional protection in case of emergency

In case of serious deviations, the system offers an additional active protection layer.

HEMS 2.0

Get more out of solar, storage and electricity prices

HEMS 2.0 automatically coordinates when to charge, discharge, and reduce grid power usage – based on solar yield, electricity consumption, electricity price, and battery status. Fewer manual interventions, more intelligent self-consumption.

photo-charming-woman-expresses-self-love-care-enjoys-wearing-new-soft-green-sweater-embraces-own-body-recalls-romantic-moment-with-boyfriend_1

IP65 dust and water resistant

Ready for the elements. Ready for real-world deployments.

Thanks to IP65, the system is better protected against dust and water and is suitable for outdoor areas, semi-covered installations and more demanding environments.

-20 °C to 55 °C operating temperature

Made for cold. Ready for heat.

From cold winters to hot summer days, the system remains operational across a wide temperature range – ideal for emergency power and mobile applications.

positive-beautiful-ginger-woman-smiles-broadly-points-right-blank-space-recommends-good-sale-offer-dressed-knitted-sweater_1

25 dB quieter operation

Quiet enough for home use

Due to its low noise level, the system is particularly suitable for homes, garages, garden sheds and backup scenarios in noise-sensitive environments.

Metal housing

More robust on the outside. More durable in everyday use.

The sturdy metal casing provides better protection during transport, impacts and demanding operating conditions – whether in the carport, garden, on the construction site or on the go.