Anker Solix Smart meter 3-phase 120 A for solar banks 2 & 3 (after discount)

Mini Power is one of the official sales partners of Anker in Europe. We promise that all our products are original products from Anker .

The Anker The smart meter does not need to be connected separately to a power source. After connecting it via the power cable, you can measure the voltage. After connecting it to the current transformer, you can measure the current. Anker The smart meter calculates the power value using the recorded voltage and current and transmits the result via WLAN to the solar bank 2 E1600 Pro/Plus.
When installing the Anker The following precautions must be followed when using smart meters, otherwise the self-consumption mode will not function correctly:
1. That Anker The smart meter measures the total electricity consumption of the household. Make sure to install the current transformer on the main line at the household's grid connection point, not on the household's distribution branch.
2. The phases of voltage and current measurement must be consistent.
3. The arrow mark on the current transformer must point to “Mains” and the current transformer must not be installed upside down.

Here you can Anker Download the SOLIX Smart Meter datasheet

When installing your Anker When installing a SOLIX Smart Meter, you must follow the safety regulations and installation instructions to ensure all connections are safe and reliable. If you are not familiar with electrical installations, we strongly recommend that you seek the assistance of a professional electrician. An electrician has the necessary knowledge and experience to guarantee the safety and correctness of the installation. Improper installation can lead to equipment damage, electrical failures, and even personal injury. Therefore, carry out the installation of the SOLIX Smart Meter with a qualified electrician. Anker Please carefully check the smart meter for your safety and to ensure the proper functioning of the device.

The Anker The smart meter communicates with the Solarbank 2 E1600 Pro/Plus via Wi-Fi and therefore must be installed in areas with an internet connection. The communication between the Solarbank 2 E1600 Pro/Plus and the Anker Smart metering operates via a LAN (Local Area Network), and during network configuration, both devices must connect to the same LAN. Otherwise, the self-consumption mode may be impaired. For example, if one device is connected to a router and the other to a mobile hotspot, the Solarbank 2 E1600 Pro/Plus and the Anker Smart meters do not communicate with each other.
Notes:
1. Place the Solarbank 2 E1600 Pro/Plus and the Anker If possible, place the smart meter no more than 10 meters from the router. Also, ensure there are as few obstacles and walls in between as possible to guarantee a strong Wi-Fi signal. Alternatively, you can add more repeaters for a stronger signal.
2. Check if the router uses 2,4 GHz communication, as the Solarbank 2 E1600 Pro/Plus and the Anker Smart meters do not support 5 GHz Wi-Fi.

The Anker The smart meter does not have a display to directly check the power consumption. You can instead install a "home system" in the AnkerCreate an app and check its performance on the home screen.

No that Anker The smart meter can only communicate with a single Solarbank 2 E1600 Pro/Plus device.

Currently, the Anker The SOLIX Smart Meter only works with a single Solarbank 2 E1600 Pro/Plus device, not with two or more Solarbank 2 E1600 Pro/Plus devices. If you want to use multiple Solarbank 2 E1600 Pro/Plus devices, you need a separate one for each device. Anker Install smart meters.
The Anker SOLIX Smart Meter also does not support working with other microinverters and energy storage products, including the Solarbank E1600, MI80 microinverter and other microinverters from Deye, APsystems and Hoymiles.

Yes, we offer a 2-year warranty as standard.