HUAWEI SUN2000 KTL L1 Description
HUAWEI SUN2000 6KTL L1 inverter for private PV systems - HUAWEI SUN2000-6KTL 1 - more phase PV-Inverter
-
-- The SUN2000 6KTL-L1 inverter is a single-phase, grid-tie inverter for PV strings that converts the DC power generated by the PV strings into AC power and feeds it into the grid.
-
-- The SUN2000 6KTL-L1 inverter is suitable for grid-connected rooftop systems and smaller grid-connected PV ground-mounted systems. Typically, a grid-tied system consists of PV strings, grid-tied inverters, AC switches and power distribution units for HUAWEI SUN2000-6KTL.
- -- Active safety: AI assisted arc detection (AFCI).
- -- Increased yields: Up to 30% more energy with optimizers.
- -- Flex communication: WiFi, Fast Ethernet, 4G
- -- 1-phase inverter with 5.500VA power
- -- 2 independent MPP tracker
- -- 1 battery connector (Plug & Play)
- -- Efficiency Up to 98.4%
- -- Communication via WLAN, Ethernet* and 4G*
- -- RS485 for Smart Power Sensor & Battery
- -- AC and DC surge protection
More information about the support and the information of the HUAWEI SUN2000-6KTL-L1 receive here on Huawei website .
Mini Power (New Power GmbH) is one of Huawei's official distributors in Europe. We promise that these products HUAWEI SUN2000 6KTL L1 are genuine Huawei products.
Specification (6KTL-L1)
Op. humidity:
Display:
Communication:
Dimensions:
Protection class:
starting voltage:
Number of MPP trackers:
Voltage range:
Max. operating current:
Max. charging power:
Max. discharge power:
Recommendations for you
Question & Answer
Do these SUN2000 L1 inverters come directly from Huawei factories?
What's in the package if I order?
Is this SUN2000 L1 inverter for private use?
These inverters are equipped with multiple MPPTs, and PLC / MBUS communication (2000KTL-A, 2KTL, and 6KTL-M2000 in conjunction with Smartlogger2A6).
Do you have SUN2000 L1 commercial inverters?
What is PLC / MBUS?
What is the difference between PLC / MBUS and RS485 communication?
For communication via RS485, the inverters (slaves) are connected in a row to the last inverter (master) connected to the SmartLogger (2-wire connection).